OOW M6 Pedestal

OOW M6 Pedestal


Weapon mounting systems Pedestal mount
Adjustable heavy-duty
pedestal support

The M6 pedestal mount combines an adjustable-height pedestal, a standard large-pintle socket, a rectangular base plate and four bolted support arms in one stable mounting architecture:
a configurable support structure with positive pintle retention.

34–47 in adjustable height
Large-pintle socket
30 × 36 in base plate
Four support arms

Stable, adjustable mounting architecture

The complete assembly uses a central height-adjustable pedestal supported from its base plate by four arms. A locking pintle socket forms the upper mechanical interface.

01

Adjustable pedestal

The pedestal can be set between 34 and 47 inches above the base plate to suit the required installation height.

02

Large-pintle interface

The upper socket is designed for the standard large pintle used with compatible mounting arrangements.

03

Positive pintle retention

A pintle lock located directly on the socket holds the installed pintle in position.

04

Four-arm support

Four support arms bolt between the base plate and pedestal to brace the central structure.

Central pedestal with braced base

The M6 pedestal mount consists of a central adjustable pedestal with a pintle socket, a base plate and four structural support arms. Pedestal height is measured from the base plate and can be adjusted across a 13-inch range.

The standard rectangular base plate measures 30 by 36 inches. Each support arm bolts from the plate to the pedestal, creating a mechanically braced mounting arrangement around the central column.

DesignationM6 Pedestal Mount
System typeAdjustable pedestal mounting system
Pedestal height34–47 in / approximately 86–119 cm
Pintle interfaceSocket for standard large pintle
Pintle retentionSocket-mounted pintle lock
Standard base plate30 × 36 in / approximately 76 × 91 cm
Support structureFour arms bolted from base plate to pedestal

Controlled defence equipment

Supply, installation, possession, transfer and use are subject to all applicable laws, export controls and end-user requirements. Installation and operation must follow the approved technical documentation, load limits, mounting instructions and safety procedures for the qualified configuration.

Logo